论文部分内容阅读
在本文中,我们将试图帮助大家解决一些难题,例如:如何利用你现有的软、硬件条件创建最优系统等等。为此我们将考虑磁盘系统的性能:硬盘与CD/DVD的连接,IDE控制器的驱动程序,交换文件的大小和位置等等。 IDE硬件连接现在大多数的主流型电脑都有基于IDE(智能磁盘设备)界面的磁盘系统。一款典型的主板应有一个IDE控制器,而每一个IDE控制器都控制两个端口通道:主要的和次要的。在主板上每个端口都有各自的接口和连线。所有的IDE设备都是通过IDE连线与主板上的IDE控制器端口相连,其中一个是以主控模式工作,而其它设备则是以辅从模式工作,这些模式的设置可以通过这些IDE
In this article, we will try to help you solve some of the challenges, such as: how to create optimal systems using your existing hardware and software conditions, and more. To this end, we will consider the performance of the disk system: hard disk and CD / DVD connection, IDE controller driver, swap file size and location, and so on. IDE Hardware Connections Most mainstream computers now have a disk system based on the IDE (Intelligent Disk Device) interface. A typical motherboard should have an IDE controller, and each IDE controller controls two port channels: primary and secondary. Each port on the motherboard has its own interface and connection. All IDE devices are connected to the IDE controller port on the motherboard through the IDE connection. One of them works in master mode while the others work in slave-slave mode. These modes can be set through these IDEs