【摘 要】
：
Alumina dispersion strengthened copper(ADSC) alloy was produced by internal oxidation.The hardness,ultimate tensile strength and electrical conductivity measure
【机 构】
：
State Key Laboratory for Mechanical Behavior of Materials,School of Materials Science and Engineerin
论文部分内容阅读
Alumina dispersion strengthened copper(ADSC) alloy was produced by internal oxidation.The hardness,ultimate tensile strength and electrical conductivity measurements and microstructure observation on the produced 0.12% ADSC(0.24% Al2O3,mass fraction)and 0.25% ADSC(0.50% Al2O3 )subjected to different annealing treatments were conducted.The results show that the microstructure of the produced ADSC is characterized by an uniform distribution of nano-Al2O3 particles in Cu-matrix;the particles range in size from 20 to 50 nm with an interparticle spacing of 30-100 nm.The produced 0.12% ADSC can maintain more than 87% hardness retention after900 ℃,1 h annealing treatment;the recrystallization can be largely retarded and is not fully completed even after annealing at 1 000 ℃ for 1 h,followed by cold deformation of 84%;local grain growth can be observed after 1 050 ℃,1 h annealing treatment.The results also show that increasing either the alumina content or cold deformation degree increases the hardness of the produced ADSC.
其他文献
企业人力资源管理的重点是资源合理配置，人才流动是人才在空间范围内的自我调节，也是人才资源的重新配置过程，人才是一种资源，它不仅本身具有价值，而且能够创造使用价值。企业人力
A new kind of nano-biomaterials of nano apatite ( NA ) and polyamide8063 ( PA ) composite was prepared by direct using NA slurry. The experimental results showe
The poly ( lactic acid- co-lysine ) was synthesized using IR and 1 H NMR to characterize the copolymer. And then the RGD modification copolymer RGD-PLAL was pre
Ti/Al2O3 composite with improved mechanical properties was synthesized by the spark plasma sintering. The effect of Nb on the microstructure of the composite wa
The grinding characteristics of two or multi-component material of clinker with limestone, blast furnace slag and fly ash were studied. Investigation was carrie
We present a Monte Carlo (MC) method to simulate the scattering for medium within randomly distributed particles,discuss the convergence of this method by varyi
目的 评价和分析2009-2013年全国抗结核药物敏感性试验(简称“药敏试验”)熟练度测试结果,改善我国结核病实验室药敏试验能力.方法 2009-2013年对全国有能力开展药敏试验的省
Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arb
Hyaluronan may be used in tissue engineering as a scaffold, and since the scaffold should degrade after the cells have proliiferated, and heat treatment is a me
An optimal concentration of the etching solution for deep etching of silicon, including 3% tetramethyl ammonium hydroxide and 0.3% (NH4)2S2O8, was achieved in t