Киреев等人的著作用分析计算方法证明:在直进式拉丝机上将钢丝直接加热到能确保生产出稳定化钢丝的温度,在工艺上是可能的。为了验证在实际生产条件下,利用现有设备和上述工艺方法生产稳定化钢筋钢丝的可能性,必须了解钢丝在拉拔过程各阶段的性能变化情况:从拉丝机穿模到规定的拉拔热制度。变形机械的影响也是很重要 The analytical calculation of work by Киреев et al. Proves that it is technically possible to heat the steel wire directly to a straight-line drawing machine to ensure that the temperature of the stabilized steel wire is produced. In order to verify the possibility of using existing equipment and the above process to produce stabilized steel wire under actual production conditions, it is necessary to know the performance changes of the steel wire during each stage of the drawing process: from the wire drawing machine to the required drawing heat system. The effect of deformation machinery is also important