论文部分内容阅读
我用硬塑管和废电线,做了几个支撑花株的支架,既能支撑, 又方便往盆内浇水,很实用,也增加了美感,制作起来非常简单。首先准备一根硬塑管和一些废电线。硬塑管长30厘米、直径2厘米即可。电线需截成3根,每根50多厘米。然后将每根电线从中间折一下,握成倒“U”形,3根并在一起,插入管内。再将每根电线向外与管的顶端拉平成90°,握成三个圆圈,成“品”字形,这个支架就算做成了。如果需要双层或多层支撑,只需用不同型号的管子,
I use hard plastic pipe and waste wire, made a few support flower plant bracket, both support, but also convenient to the basin watering, it is practical, but also increased the beauty, making it very simple. First prepare a hard plastic pipe and some waste wires. Hard plastic pipe 30 cm long, 2 cm in diameter can be. Wires need to be cut into 3 pieces, each more than 50 cm. Then fold each wire from the middle, holding it in an inverted “U” shape, three together and insert it into the tube. Then each wire outward and the top of the tube flattened 90 °, holding three circles, into a “product” shape, even if the stent made. If you need double or multi-layer support, just use different types of pipes,