高压水除鳞系统主要是对钢坯表面氧化铁皮进行破除,提高产品表面质量。在正常使用时,压力持续在13MPa左右,喷嘴螺母连续遭受冲击载荷、高温和水的腐蚀,造成螺母强度下降,导致脱落损坏造成泄漏,使整个水除鳞系统压力提不上去。如果保持相同的压力,就要提高电机的频率,给电机造成 High-pressure water descaling system is mainly on the surface of the billet oxide scale to get rid of, improve product surface quality. In normal use, the pressure continued at about 13MPa, nozzle nut suffered continuous impact load, high temperature and water corrosion, resulting in decreased strength nuts, resulting in loss of leakage caused by leakage, so that the entire water descaling system can not mention the pressure. If you maintain the same pressure, it is necessary to increase the frequency of the motor to the motor