论文部分内容阅读
我们农机局技术小分队在巡回服务中常发现,一些195型柴油机在工作中因泵油量不够,引起烧瓦的事故。开始,我们误认为机油油路不通的原因,就用气筒和柴油清洗油道,结果泵油量仍然不够,同时油路中有气泡出现,说明有漏气,我们从油底壳到油盘、油表、机油泵等关系到密封处的螺栓进行了紧固,这样从外表看没有问题了,结果泵油量还是不足。后经分析检查,原来是网式滤清器与机体侧壁联接处的管接螺栓丝扣长两扣,而螺母短两扣,虽然机体两侧
In our touring service, we often found out by some technical teams of the Agricultural Bureau that during the work, some 195 diesel engines caused the accident of burning tiles because of insufficient pump oil. At the beginning, we mistakenly thought that the reason why the oil was blocked was that the pump and diesel oil were used to clean the oil passage. As a result, the amount of pump oil was still insufficient. At the same time, bubbles appeared in the oil passage, indicating that there was a leak. From the oil pan to the oil pan, Oil meters, oil pumps and other related to the sealing of the bolts were tightened, so there is no problem from the outside, the result is insufficient pump oil. After the analysis and examination, the original network filter is connected with the body wall at the screw bolt buckle long two buckle, and the nut short two buckles, although both sides of the body