论文部分内容阅读
油、气工业的经济状况必须从降低人力与资本消耗和现在设备组最优化加以考虑，为满足这些要求的最可行的方法是系统的自动化。由于这个原因，气举操作技术把重点放在开发组装的系统，这种组装系统可在每个井口和平台自动操作。智能控制器可以与中心主站一起使用或当作单独的生产设备，它对预定的现场参数有自动而迅速的反应。在降低人力需要之外，智能控帛器将通过增加连续气举效率来进一步增强气举操作。此外，控制器还可自动卸去由气体波动引起的载荷。有了自动化系统，操作者可建立一套全油田的程序，从而最有效地利用气体，节约人力，这正符合目前油田经济状况的要求。
The economics of the oil and gas industry must be considered from the point of view of reducing manpower and capital expenditures and the current optimization of equipment groups. The most viable way to meet these requirements is system automation. For this reason, gas lift operating techniques have focused on the development of assembled systems that can be automated at each well head and platform. The intelligent controller can be used with the central main station or as a stand-alone production facility, which responds automatically and quickly to predefined field parameters. In addition to reducing manpower requirements, smart controls will further enhance gas lift by increasing continuous gas lift efficiency. In addition, the controller can automatically remove the load caused by gas fluctuations. With an automated system, operators can set up a full field program to make the most efficient use of gas and save manpower, which is in line with the current economic conditions in the field.