论文部分内容阅读
目的了解上海市青浦区某箱包制造企业2015年职业病危害关键控制点和职业病防护方面存在的问题。方法采用职业卫生现场调查、现场检测法对该项目进行职业病危害防护情况分析。结果该项目职业病危害因素包括其他粉尘、苯、甲苯、二甲苯、正己烷、乙二醇、乙酸乙酯、乙酸丁酯、噪声。其中,印刷车间调墨岗位二甲苯时间加权平均浓度(C_(TWA))=78.3 mg/m~3、印刷岗位二甲苯C_(TWA)=101.3 mg/m~3,超过国家职业卫生标准限值。缝纫车间、印刷车间通风不佳。劳动者个体防护用品佩戴情况不佳。结论车间调墨岗位、印刷岗位为职业病危害关键控制点。该项目属于职业病危害较重的项目。重点岗位防毒措施欠缺,需尽快整改。
Objective To understand the problems existing in key control points of occupational hazards and occupational disease prevention in a certain luggage manufacturer in Qingpu District, Shanghai. Methods occupational health field survey, on-site detection method for occupational disease hazard protection of the project analysis. Results The occupational hazards of the project include other dust, benzene, toluene, xylene, n-hexane, ethylene glycol, ethyl acetate, butyl acetate, noise. The time-weighted average density of xylene (C TWA) = 78.3 mg / m ~ 3 in the printing workshop and xylene C TWA = 101.3 mg / m ~ 3 in the printing workshop, exceeding the limit of national occupational health standards . Sewing workshop, printing workshop poor ventilation. Workers wearing personal protective equipment poor condition. Conclusion Workshop refilling positions, printing positions for occupational hazards critical control point. This project belongs to the project of serious occupational hazards. Lack of anti-virus key positions, rectification as soon as possible.