法国萨西洛尔、索拉克和索尔梅公司在高炉上使用了法国钢铁研究院研制的、由Trindel公司制造的机械式炉料剖面形状探测器。测定装置系重锤式,自动操作和记录,在径向上最多可选择15个测点,但通常因受到大钟启闭间隔时间的制约,故取10～12点,测点之间的距离可根据操作者的要求加以确定,并能进行分区(边缘、中间、炉心)测量。通过操作除了获得炉料剖面形 France’s Saxilol, Sooke and Solmet used a mechanical charge profiler developed by the French Institute of Iron and Steel and manufactured by Trindel on blast furnaces. Measuring device is heavy hammer, automatic operation and recording, the radial can choose up to 15 measuring points, but usually because of the big clock opening and closing interval constraints, so take 10 to 12 points, the distance between the measuring point may Determined according to the operator’s requirements and can be zoned (edge, center, heart) measurements. In addition to obtaining the charge profile by operation