变氧浓度环境下煤自燃临界温度及影响因素分析

来源 :煤炭技术 | 被引量 : 0次 | 上传用户:dragon122
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
为研究氧浓度对不同煤种自燃过程中临界温度的影响,选取了3种变质程度煤样,利用小样程序升温实验数据,采用指标气体法、耗氧速率法和交叉点温度法分别确定了实验煤样在10%、15%和21%供氧浓度下的临界温度值以及范围。测试结果表明:基于交叉点温度测试得到的临界温度与绝热氧化法所测结果基本一致,且实验周期短;煤自燃临界温度随着氧气浓度的上升而降低;交叉点温度法测量煤临界温度误差较小,是理想的测试煤自燃临界温度的方法。 In order to study the effect of oxygen concentration on the critical temperature in the process of spontaneous combustion of different coal types, three types of coal samples with different degrees of metamorphism were selected. Experiments were made on the basis of sample warming program. The experimental data of gas index, oxygen consumption rate and cross point temperature Critical temperature values ​​and ranges for coal samples at 10%, 15% and 21% oxygen concentration. The test results show that the critical temperature based on the cross-point temperature test is basically consistent with the adiabatic oxidation test, and the experimental period is short. The critical temperature of coal spontaneous combustion decreases with the increase of oxygen concentration. The cross-point temperature measurement of coal critical temperature error Smaller, is the ideal way to test the critical temperature of spontaneous combustion of coal.
其他文献
为了能够对白云东矿的边坡安全进行研究,采用FLAC3D为数值模拟计算工具,通过采用强度折减法对边坡的稳定性进行模拟计算。最终得出白云东矿由于地层多为白云岩或长石板岩,岩
呼吸性粉尘严重危害井下作业人员的安全和健康,根据井下综采工作面风流场和颗粒场的特点,建立了基于气固两相流理论的颗粒离散相模型,运用Flunt软件对呼吸性粉尘分布规律进行了
针对煤与瓦斯共采技术实践应用的可靠性分析,构建了GAHP-BOCR模型,通过计算分析不同技术方案的优劣性。首先建立了煤与瓦斯共采技术指标体系,运用灰色层次法进行数据处理得出一
在研究煤矿区地质、水文地质及采矿条件等的基础上,采用Visual MODFLOW进行煤层开采弱透水层厚度变化对上覆松散含水层影响的数值模拟研究。结果表明:在模拟期间,松散含水层
为了解决常规瓦斯抽采钻孔密封性差、瓦斯抽采浓度低的问题,提出了新型注气式主动封孔技术,通过其主动密封特性,实时封堵钻孔内部动态裂隙,进而提高瓦斯抽采浓度和抽采效率。
为解决综放工作面上隅角瓦斯治理难题,提出高位定向长钻孔瓦斯抽采技术方法。以王家岭煤矿为试验对象,通过理论计算、数值模拟方法,确定高位定向钻孔布设合理层位,并以此指导
为了解决济宁二号煤矿十采区开采邻近采空区积水突水隐患问题,基于采区地质、水文地质条件,采用理论计算和数值模拟方法对煤层开采隔水煤柱破坏深度进行了理论计算和过程模拟