【摘 要】
：
In order to improve the thermal storage capacity of expanded vermiculite (EV) based form-stable composite PCM (FS-PCM) via organic modification of EV, first, EV was modified with a sodium stearate (NaSt) as surface modifier, and organic EV (OEV) with hydr
【机 构】
：
State Key Laboratory of Silicate Materials for Architecture, Wuhan University of Technology, Wuhan 4
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
In order to improve the thermal storage capacity of expanded vermiculite (EV) based form-stable composite PCM (FS-PCM) via organic modification of EV, first, EV was modified with a sodium stearate (NaSt) as surface modifier, and organic EV (OEV) with hydrophobicity and higher adsorption capacity for fatty acid was obtained. A novel capric-stearic acid eutectic (CA-SA)/OEV FS-PCM with high thermal storage capacity was then developed. OEV and CA-SA/OEV were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermal gravimetry (TG), and thermal cycling test. Results showed that OEV has obvious hydrophobicity and a higher adsorption capacity for fatty acid. Its adsorption ratio has increased by 48.71％compared with that of EV. CA-SA/OEV possesses high thermal storage density (112.52 J/g), suitable melting temperature (20.49 ℃), good chemical compatibility, excellent thermal stability and reliability, indicating great application potential for building energy efficiency. Moreover, organic modification of inorganic matrix may offer novel options for improving its adsorption capacity for organic PCMs and increasing heat storage capacity of corresponding FS-PCMs.
其他文献
Ti(C,N)-TiB2 cermets were fabricated from Ti(C,N), TiB2, Co and WC powder mixtures via a vacuum hot pressing process. The influence of TiB2 content on their microstructures and mechanical properties was investigated. As a result of the elevated TiB2 conte
A low-cost and efficient filter medium for Cd(II) removal was prepared by anchoring -SCN functional groups (by 3-thiocyanatopropyltriethoxysilane, TCPS) on ceramsite via the approach of synthesizing a honeycomb calciumaluminum-silicate-hydrate (C-A-S-H) l
An adhesive of the SiBCN ceramic was synthesized through the polymer derived ceramics (PDC) route. Meanwhile with higher adhesion strength and simpler process condition, the polyborosilazane (PSNB) was modified by E-44 epoxy resin. The E-44 epoxy resin wa
We developed cordierite-mullite composite ceramic materials to package and encapsulate PCM, and presented a preparation process from raw materials of kaolin, talc and alumina. The properties and microstructre of cordierite-mullite composite ceramic were s
Structure and mechanical properties of Calcium silicate hydrate (C-S-H) at a molecular level act as “DNA” of cement-based construction materials. In order to understand loading resistance capability of C-S-H gel, research on molecular dynamics (MD) was ca
A mild chemistry route was developed to prepare carbonaceous nanofibers-titanium dioxide (CNF-TiO2) nanocomposites for removal of dye pollutants. In the process of the template-directed hydrothermal carbonization (HTC), ultrathin Te nanowires were adopted
The corrosion behavior and the effects of temperature on critical chloride content (Ccrit) of steel fibers in RPC were analyzed by a pH meter, ion chromatography, mercury intrusion porosimetry (MIP), and electrochemical techniques. It was found that the s
In order to enhance the fracture toughness of mullite,three-dimensional braided carbon fiber reinforced mullite (C/mullite) composites were prepared using the Al2O3-SiO2 sol with a high solid content as raw material.Mullitization behavior of the sol was c
The sulfate ions immobilization behavior of calcined layered double hydroxides (CLDHs) in the hardened cement paste was investigated. The experimental results show that the sulfate ions in cement paste are immobilized by CLDHs to reconstruct the layered s
To study the effect of atmospheric pressure on the properties of fresh and hardened air-entrained concrete, three kinds of air entraining agents were used for preparing air-entrained concrete in the plateaus (Lhasa, 61 kPa) and the plains (Beijing, 101 kP