Sulfate Ions Immobilization of Calcined Layered Double Hydroxides in Hardened Cement Paste and Concr

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:liuzhenguo_09
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The sulfate ions immobilization behavior of calcined layered double hydroxides (CLDHs) in the hardened cement paste was investigated. The experimental results show that the sulfate ions in cement paste are immobilized by CLDHs to reconstruct the layered structure and aggregate around CLDHs. The immobilization amount of sulfate ions by CLDHs reaches 4.74×10-3 mol/g, while the increasing amount indicates non-linear relation with the addition of CLDHs. The incorporation of CLDHs decreases the amount of ettringite formed to limit the expansion of cement paste, which decays the sulfate reaction to enhance the sulfate resistance of concrete.
其他文献
The bovine hydroxyapatite (BHA) was applied to prepare biological tissue engineering scaffolds by the method of extrusion freeforming.To achieve this goal,BHA were added to sodium alginate (SA) solution to form a slurry system in appropriate proportion.Th
Mg/Ni hybrid foams were fabricated by the electroless method. The Ni-P (Nickel-Phosphorous) coatings were deposited on the surface of closed-cell Mg alloy foams. The composition, microstructure and phases of the Ni-P coatings were characterized by scannin
Ti(C,N)-TiB2 cermets were fabricated from Ti(C,N), TiB2, Co and WC powder mixtures via a vacuum hot pressing process. The influence of TiB2 content on their microstructures and mechanical properties was investigated. As a result of the elevated TiB2 conte
A low-cost and efficient filter medium for Cd(II) removal was prepared by anchoring -SCN functional groups (by 3-thiocyanatopropyltriethoxysilane, TCPS) on ceramsite via the approach of synthesizing a honeycomb calciumaluminum-silicate-hydrate (C-A-S-H) l
An adhesive of the SiBCN ceramic was synthesized through the polymer derived ceramics (PDC) route. Meanwhile with higher adhesion strength and simpler process condition, the polyborosilazane (PSNB) was modified by E-44 epoxy resin. The E-44 epoxy resin wa
We developed cordierite-mullite composite ceramic materials to package and encapsulate PCM, and presented a preparation process from raw materials of kaolin, talc and alumina. The properties and microstructre of cordierite-mullite composite ceramic were s
Structure and mechanical properties of Calcium silicate hydrate (C-S-H) at a molecular level act as “DNA” of cement-based construction materials. In order to understand loading resistance capability of C-S-H gel, research on molecular dynamics (MD) was ca
A mild chemistry route was developed to prepare carbonaceous nanofibers-titanium dioxide (CNF-TiO2) nanocomposites for removal of dye pollutants. In the process of the template-directed hydrothermal carbonization (HTC), ultrathin Te nanowires were adopted
The corrosion behavior and the effects of temperature on critical chloride content (Ccrit) of steel fibers in RPC were analyzed by a pH meter, ion chromatography, mercury intrusion porosimetry (MIP), and electrochemical techniques. It was found that the s
In order to enhance the fracture toughness of mullite,three-dimensional braided carbon fiber reinforced mullite (C/mullite) composites were prepared using the Al2O3-SiO2 sol with a high solid content as raw material.Mullitization behavior of the sol was c