在芝加哥举行的2017塑料瓶盖&瓶塞会议上,有演讲者称,当发泡剂用于瓶塞时,可成功减轻产品重量,缩短生产周期。这项由iD Additives公司和注塑机制造商住友(SHI)德马格合作开展的研究项目表明,经测试,加入发泡剂,使塑料制品内部产生微小气泡的同时,不会影响产品的表面质量。“真正改变的事情是它打开了瓶盖和瓶塞市场,”iD Additive总裁Nick Sotos说道,“以前做不 At the 2017 Plastic Cap & Cork Conference in Chicago, a speaker said that when the blowing agent was used in cork stoppers, product weight and cycle time could be reduced successfully. The research project, conducted by iD Additives and injection molder maker Sumitomo (SHI) Demag, shows that adding a blowing agent to the test results in the formation of tiny bubbles inside the plastic product without affecting the surface quality of the product . ”What’s really changing is that it opens the market for caps and corks," said Nick Sotos, president of iD Additive.