八甲基环四硅氧烷本体聚合动力学研究

来源 :中国化学工程学报 | 被引量 : 0次 | 上传用户:bigrobbin
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The kinetics of bulk polymerization of octamethylcyclotetrasiloxane under acid circumstance is studied.A kinetic model is put forward and kinetic parameters are obtained through optimization.
其他文献
A series of lanthanum containing Ni-base catalysts were prepared by citric acid complex method.Carbon nanotubes (CNT) were synthesized bY catalytic decomposing
Effects of processing technology on the properties such as relative density, flexural strength, fracture toughness, hardness, etc. and the microstructure of rar
The study of recent years found that big bulk amorphous alloys were formed for some multi-element compositions at rapid cooling speed such as Zr-, La-, Fe-, Mg-
The forming-regions and properties were studied on phosphate system glasses Sm2O3 doped by two step melting method. It shows that with the increasing of rare ea
Phosphors with ( Ce0. 67 -xGdxTb0. 33 ) MgAl11 O19 (0 ≤ x ≤0.37 ) composition were prepared by sol-gel processing. The preparation process, crystal structure
Anodic dissolution behaviour of Ni in mono-, di- and trichloroacetic acids has been investigated by measuring current densities of Ni electrode (versus SCE) at
In this paper, undoped LaCl3 crystal growth was reported by modified Bridgman method.The starting materials used as charge for crystal growth was found to conta
The species and their formation constants in the ternary systems were obtained by the Scogs2 software from potentiometric titration data. The Comics software wa
The flow maldistribution and the effect of different inlet configuration on the flow distribution in platefin heat exchangers were studied experimentally. It is
The improvement of machining behavior of prehardened-mould steel for plastic is realized by using computer-aided composition design in this work. The results sh