吊装卧轴HL转轮,目前没有统一的标准方法,有的在下环出水端面上焊吊耳,不仅破坏了转轮的良好结构,而且操作起来也并不方便;有的电站曾发生过转轮没栓好坠落砸伤人的事故。这里介绍一种经过多年实践的方法。 1)将待装的转轮键槽向上横放,从叶片出水边转轮中心轴线以上的某叶道穿人吊绳的一个头,从叶片进水边抽出,以键槽为对称轴跨过适当个叶片后,此绳头再从进水边穿 Hoisting horizontal axis HL runner, there is no uniform standard method, and some in the next ring on the water welding lugs, not only undermined the good structure of the runner, but also not easy to operate; some have happened runner Did not bolt a fall accidental injury. Here is a method that has been practiced for many years. 1) the wheel keyway to be installed upside down, from the blade edge of the runner hub above a certain number of people through the rope hanging rope, out of the water from the blade to the keyway as the axis of symmetry across the appropriate After the leaves, this rope then wear water from the edge