论文部分内容阅读
辑辑同志:酊膏剂的制造,不是像一般同志所认为的方法很简单,只要随便的按照药典或制剂规范如法泡制一下即制得合格成品。如在好机种酊剂的制造过程中,就存在着很多问题,若不去深切了解和设法克服,则往往制成的酊剂,不是过滤困难,就是产品混浊,貯(?)稍久即会有很多沉淀。尤其是按照制剂规范制造吐根酊、复方氯仿酊等时,很容易发生上述情况:1.吐根酊:按照制剂规范所规定的方法,是用吐根流浸膏50ml、醇90% 250ml,甘油200ml、蒸馏水适量共制1000ml.混匀制成;所得酊剂很难过滤,并显混浊,主要原因是1)吐根流浸膏內所含油脂在
Comrades in the series: The manufacture of the ointment is not as simple as what the average comrade thinks. It can be manufactured by simply infusing the product according to the pharmacopoeia or preparation specifications. If there is a lot of problems in the manufacturing process of a good type of tincture, if you don’t go deep into understanding and try to overcome it, the tincture that is often made is either not difficult to filter, or it is cloudy or turbid. A lot of precipitation. In particular, in accordance with the preparation specifications to produce ipecacuan, compound chloroform, etc., it is easy to occur in the above situation: 1. ipecai pi: in accordance with the provisions of the preparation specifications, is the use of ipeca rhizome extract 50ml, alcohol 90% 250ml, 200ml of glycerol and distilled water were prepared in an amount of 1000ml. The mixture was prepared by mixing; the resulting tanning agent was difficult to filter and was cloudy, mainly due to 1) the oil contained in the twigs of the twigs.