【摘 要】
：
Surface reconstruction from unorganized data points is a challenging problem in Computer Aided Design and Geometric Modeling.In this paper,we extend the mathematical model proposed by Jüttler and Feli
【出 处】
：
Numerical Mathematics:Theory,Methods and Applications
论文部分内容阅读
Surface reconstruction from unorganized data points is a challenging problem in Computer Aided Design and Geometric Modeling.In this paper,we extend the mathematical model proposed by Jüttler and Felis(Adv.Comput.Math.,17(2002), pp.135-152)based on ten
其他文献
We present a novel algorithm for adaptive triangular mesh coarsening. The algorithm has two stages. First, the input triangular mesh is refined by iteratively applying the adaptive subdivision operato
We present a robust mesh sharpening approach to reconstructing sharp features from blended or chamfered features, even with noise and aliasing errors. Feature regions were first recognized via normal
Fourier-domain rapid scanning optical delay line (RSOD) was introduced for phase modulation and depth scanning in a time-domain optical coherence tomography (TD-OCT) system. Investigation of parameter
Xuande Copper Diamond Bell and Diamond ClubThis set of bell and club was a ritual instrument donated to Tibet by the Ming Central Government in the period of Emperor Xuandes reign (1426-1435). In the
A new architecture of digital processors for passive UHF radio-frequency identification tags is proposed. This architecture is based on ISO/IEC 18000-6C and targeted at ultra-low power consumption. By
A displacement sensor based on the fiber Fabry-Perot (F-P) cavity was proposed in this paper. Theoretical and experimental analyses were presented. Displacement resolution was demonstrated by spectrum
一、基于PDEs的图像平滑方法传统的图像平滑算法如均值滤波、中值滤波和高斯滤波等,由于不考虑图像的形状特征,其平滑结果等价于传导系数为常量的热扩散方程,属于各向同性扩散,所以在去噪的同时也模糊甚至破坏了图像的边缘。与热扩散模型相比较,各向异性扩
提出一种摄像机现场柔性平面靶标标定方法.该方法仅需在平面靶标上设置少量空间三维坐标已知特征点.在这些特征点中,任意共线的特征点可以确定一条直线,因此可以确定若干条直线.根据在透视投影变换下,直线和直线的交点均为不变量的性质,可获得除已知特征点之外的大量标定特征点用于摄像机标定.基于误差传播理论,对标定点的不确定度进行了详细分析.采用研制的尺寸为100 mm×100 mm,加工精度为0.01 mm的
在迭代最近等值点ICCP(Iterative Closest Contour Point)算法的地形辅助导航中,利用单纯形优化方法实现对最优航迹的估计,但在匹配中往往得到的只是局部最优解,导致误匹配发生,严重时导致匹配发散.以ICCP算法为研究对象,研究并建立了ICCP方法的误匹配判断准则,以减小误匹配误差的影响和提高匹配精度.利用概率数据关联建立ICCP算法的误匹配判断准则,仿真结果表明,与无误
提出了一种可以获得目标病例健康时股骨头模型的新建模方法.首先利用一种精确的自动分割方法在髋骨部位CT序列图像中提取髋臼轮廓;然后使用基于等距栅格采样法与辐条式采样法相结合的混合采样法得到髋臼凹面的空间坐标点集,并剔除其中的误差采样点;最后采用基于二次曲面一般方程的方法拟合原始股骨头椭球面模型.通过对2例不同坏死程度的男性患者进行修复性的对比仿真,以及对50例不同年龄(25～79岁)患者修复重建后的