【摘 要】
：
This paper studies on a division method of the whole aeroengine loading spectrum flight mission segment and rotor speed mission segment,which is based on the actual flight actions and related to the flight operations of aeroengine and is suitable for the
【机 构】
：
Jiangsu Province Key Laboratory of Aerospace Power System,College of Energy and Power Engineering,Na
论文部分内容阅读
This paper studies on a division method of the whole aeroengine loading spectrum flight mission segment and rotor speed mission segment,which is based on the actual flight actions and related to the flight operations of aeroengine and is suitable for the variable-speed aeroengines such as turbojet and turbofan.Through the research,the aeroengine loading spectrum operation-related mission segments can be divided,which can provide important data basis for the life research on the structures which are sensitive to flight maneuver (such as the main shaft,large gearbox and instal-lation section),lay a foundation for the simulation,compilation and prediction of the whole aero-engine loading spectrum.Firstly,based on the summary of basic flight actions in actual flight,the division of flight mission segment was realized by programming.Moreover,the aeroengine rotor speed mission segments,associated with flight actions and missions,were divided based on the flight mission segment division results.Besides,the efficiency and accuracy of the mission segment divi-sion results were verified by adopting measured loading spectrum data.Finally,the characteristics of speed mission segment division results were compared and analyzed in tables and figures.The comparison results show that the characteristics of similar speed mission segments are similar,while the characteristics of different speed mission segments are different.And the shapes of similar mission segments vary to the change of flight actions and operations,which can reflect the operation-related feature of the segments.
其他文献
Manufactured blades are inevitably different from their design intent,which leads to a deviation of the performance from the intended value.To quantify the associated performance uncertainty,many approaches have been developed.The traditional Monte Carlo
The application of grooved surface structure is an emerging and effective means in tur-bulence flow control.However,for a realistic configuration,the global flow field described directly by simple application of massive grids makes it unfeasible to simula
Threaded fasteners naturally tend to loosen under vibration,impact,or alternating ther-mal load.Various anti-loosening methods or strategies are widely applied for preventing loosening,including a few anti-loosening designs and anti-loosening structures.I
The deviations of trajectory and attitude angle for internal store separation are evaluated by two wind tunnel test methods.One is the Freedrop Test (FDT),which is known as unsteady and time-dependent method of scaled model.The other is the Captive Trajec
Flow separation due to shock wave/boundary layer interaction is dominated in blade passage with supersonic relative incoming flow,which always accompanies aerodynamic perfor-mance penalties.A loss reduction method for smearing the passage shock foot via S
The thermal radiation of micron-sized condensed phase particles plays a dominant role during the heat transfer process in aluminized Solid Rocket Motors (SRMs).Open research mainly focuses on the radiative properties of alumina particles while the study c
Aviation and aerospace system are typical Phased-Mission Systems (PMSs) featured with varying configuration,phased load condition and cross phase failure correlation.The coupling effect of Functional Dependency (FDEP) and Physical Dependency (PDEP) has a
Tuned Mass Dampers (TMDs) are often attached to a main structure to reduce vibra-tion,and the TMDs\' positions are important to affect the structural dynamic performance.How-ever,the TMDs\' positions and the material layout of the structure act on eac
For a homogeneous,continuous,and isotropic material whose constitutive relationships meets with the Ramberg-Osgood law (R-O law),the energy in the elastoplastic indentation with a ball indenter was theoretically analyzed,and the proportional superposition
Partial surge is a type of instability inception in transonic compressors and occurs in the form of axisymmetric low-frequency disturbances localized in the hub region.Previous studies illus-trate that the frequency of partial surge is set by the Helmholt