本文以某U型高处作业吊篮为研究对象,基于ANSYS有限元分析软件平台,采用静力分析研究了U型高处作业吊篮在载荷作用下的结构强度;在满足吊篮结构强度和刚度要求的情况下,对吊篮结构进行质量优化,节约工程材料,降低吊篮设计成本,提高U型高处作业吊篮经济性。优化结果表明通过该结构优化得到的吊篮结构布局合理且能够满足强度要求。 Based on ANSYS finite element analysis software platform, the structural strength of U-shaped work basket under load is studied by static analysis. When the structural strength of the U-shaped work basket is satisfied, Stiffness requirements of the circumstances, the quality of the basket structure optimization, saving engineering materials, reducing the design cost basket, U-height to enhance the economic operation basket. The optimization results show that the structural optimization of the basket structure is reasonable and can meet the strength requirements.