论文部分内容阅读
推土铲是推土机的一个主要工作部件,有时会出现不水平问题,推土作业时,铲刀一边吃土深,另一边吃土浅,车辙横向为一边低一边高,问题严重时,使车跑偏,经常向一边拐弯,以致无法正常工作。推土铲是个焊合件,长2500毫米、宽2240毫米、高850毫米。由于其外形尺寸大,运输不方便,更换一个,又不经济,因此需要一种就地修理方法。首先,我们对影响推土铲不水平的各因素进行了综合分析,并对两台典型的推土铲(一个是水平的,另一个是不水平的)进行了检测,我们发现装在推土机上的推土铲不水平的主要原因是推土铲焊合件本身的问题,而两个左右臂的高度不一致又是造成推土铲
Bulldozer is a major working part of bulldozer, and sometimes there will be no level problems, bulldozing operations, the blade while eating deep soil, the other to eat shallow soil, low side of the rut for one side of the high, the problem is serious, the car Deviation, often turning to the side, so can not work properly. The blade is a welded part, 2500 mm long, 2240 mm wide and 850 mm high. Due to its large size, inconvenient transportation, changing one, and not economical, there is a need for an in-place repair method. First of all, we conducted a comprehensive analysis of the various factors that affect the level of bulldozer blade. Two typical bulldozers (one horizontal and one horizontal) were tested and we found that on bulldozers The main reason for the dozer not horizontal is the problem of the dozer weldment itself, and the inconsistent height of the two left and right arms is the result of the dozer