【摘 要】
：
Composite layer with nitrocarbonide and sulfide was made on the surface of CrMoCu alloy cast iron by combined treatment of ion nitrocarburizing and sulphurizing
【机 构】
：
Department of Materials Science and Engineering
论文部分内容阅读
Composite layer with nitrocarbonide and sulfide was made on the surface of CrMoCu alloy cast iron by combined treatment of ion nitrocarburizing and sulphurizing. The composite layer is composed of sulfide layer, nitrocarbonide hypo-surface layer and its diffusing layer, the size of sulfide globular grains distributing equably on the surface is in nano-micron-scale, and the phase structure of the composite layer is composed of FeS, FeS1-x, Fe2C and Fe3N. Under oil lubrication, sulphurized surface shows good scuffing-resistance only under low velocity, and nitrocarburized and sulphurized surface greatly improves the scuffing-resistance and wear-resistance of CrMoCu alloy cast iron, its integrated friction and wear properties are better than those of the plain and sulphurized surfaces under all the velocities.
其他文献
The microemulsion AEO-9/butanol/cyclohexane/nitrate aqueous solution (or ammonium salt aqueous solution) was studied, which was used as micro-reactor in prepari
The effect of the deferent rubber content substituted for fine aggregate on the mortar performancewas studied. The effects of the rubber coated with the coating
The nanocrystalline La1-xSrxCrO3 was prepared by sol-gel method using La( NO3 )3 · 6H2O, Sr( NO3 )2 and respectively. The phase transformation from dry-gel to
Electrodeposited Ni matrix/Al microparticles or nanoparticles dispersed composite coatings (termed as EMCCs or ENCCs) are developed from a Ni-based electrolyte
The formation process, microstructure and mechanical properties of transient liquid phase (TLP) bonded aluminium-based metal matrix composite (MMC) joint with c
The reduction diffusion method was performed for the sludge scrap of Nd-Fe-B sintered magnets with adding Ca metal to recover the oxidized Nd-Fe-B phase. After
AISI302 stainless steel samples were modified by elevated temperature nitrogen plasma immersion ion implantation at temperature ranging from 330 ℃ to 450 ℃. T
Self-propagating high-temperature synthesis(SHS) is a new kind of material synthesis technique, and has characteristics with respect to low energy consumption,
When a gun fires the diffusion of chemical species from the propellant gas, such as CO, CO2, H2, H2O and N2, into the hot surface through the microcracks forms
The monitoring system design used in anti-corrosion of coating wire of steel in ocean were concerned. A corrosion monitoring system adapting to corrosion observ