【摘 要】
：
The density, microstructure and magnetic properties of non-doped Mn-Zn ferrite nanoparticles sintered compacts were investigated. The compacts of non-doped Mn-Z
【机 构】
：
School of Material Science and Engineering
论文部分内容阅读
The density, microstructure and magnetic properties of non-doped Mn-Zn ferrite nanoparticles sintered compacts were investigated. The compacts of non-doped Mn-Zn ferrite nanoparticles were sintered by segmented-sintering process at lower sintering temperature. The density of sintered samples was measured by Archimedes method, and the phase composition and microstructure were examined by XRD and SEM. The sintered Mn-Zn ferrite magnetic measurements were carried out with Vibrating Sample. The results show that the density of sintered compacts increases with the rising of sintering temperature, achieving 4.8245 g·cm-3 when sintered at 900 ℃, which is the optimal density of Mn-Zn functional ferrite needed and from the fractured surface of sintered samples, it can be seen that the grain grows well with small grain size and homogeneous distribution.
其他文献
Several automotive parts such as door panels have been manufactured by using load-adapted blanks for crash optimization and weight minimization.Recently, Tailor
Different batches of natural graphite powders and electrographite powders were characterized by impurity, degree of graphitization, particle size distribution,
With miniaturization and complication of the shape of electronic devices in recent years, powder injection molding (PIM) seems to be a suitable process for fabr
新课程实施以来,许多教师的教学活动充满了新意。但同时我们注意到,教师在课堂教学中的“浪费”现象仍比比皆是,不能不引起我们的思考。
Since the implementation of the n
Low resistivity and highly transparent ITO conducting films for solar cell applications were fabricated at low temperature by r.f. Magnetron sputtering. ITO fil
Magnetic microstructure of high performance Nd-Fe-B magnets was investigated by using magnetic force microscopy. The correlation between magnetic microstructure
The thermal stability of lithium-ion battery electrolyte could substantially affect the safety of lithium-ion battery. In order to disclose the thermal stabilit
Cu-coated powder was fabricated by electroless plating process, and the composition and morphology of coated powder were studied.Moreover, Cu-30, 40, 50 vol.%Si
介绍了旌德县种子市场水稻品种的管理现状,分析了存在的问题,提出了解决市场中水稻品种多、乱、杂的建设性措施.
Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the