我公司6 000t/d熟料生产线,正常停窑时,窑主传电动机停止后切换为辅传电动机工作,传统上由人工现场手动控制回转窑筒体转动的时间及停止时间,这样既增加人力成本,也不便于精确控制窑体温度的均衡,造成窑筒体变形,缩短其使用寿命。在停窑后,由于烟室温度处在不断降低的过程中,我们积累并总结了温度变化与窑辅传时间间隔的对应关系,根据温 When the normal kiln is stopped, the kiln main switch motor is switched to the secondary motor, which is traditionally controlled by the man-made site to control the rotation time and stop time of the rotary kiln cylinder, which will not only increase the manpower Cost, it is not easy to precisely control the temperature balance of kiln, kiln caused deformation of the cylinder, shorten its service life. After stopping the kiln, as the temperature of the smoke chamber is continuously decreasing, we accumulate and sum up the corresponding relationship between the temperature change and the time interval of the kiln auxiliary transmission. According to the temperature