【摘 要】
：
A nanostructured surface layer can be formed in Ni metal treated by surface mechanical attrition (SMA). The microstructure was investigated by using optical mic
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
A nanostructured surface layer can be formed in Ni metal treated by surface mechanical attrition (SMA). The microstructure was investigated by using optical microscope, X-ray diffractometer and transmission electron microscope,respectively. Mechanical property measurements indicate that the yield strength of the surface layer raises significantly while the tensile strength somewhat changes and the elongation percentage reduces severely compared with that of the inside layer. Meanwhile, yield-drop-like phenomenon occurs in the surface layer after SMA treatment. In order to compare the mechanical behavior of nanostructured materials with two phases, Fe-30Ni nanostructured alloy was also investigated.
其他文献
A surface engineering approach for a novel pre-treatment of hard metal tool substrate for optimum adhesion of diamond coatings is presented. Firstly, an alkalin
亚波长光栅因光栅参量的不同而具有不同的衍射特性 ,通过对亚波长光栅参量的合理设计来实现消偏振窄带滤波是一种新的方法与途径。首先分析了基于共振异常的窄带滤波的物理机
Diffusion layers produced on carbon steel surface in vacuum titanizing process were investigated. Studies of layers thickness, their morphology, titanium, carbo
Coated tools are widely used in todays metal cutting industries and have significantly improved machining productivity through reducing operation costs and time
首先建立了混合有源滤波器无源网络的内部电磁干扰模型,根据三相电流和磁感应压降之间的矢量关系,推导出无源网络等效电抗和等效电阻的数学表达式,以及品质因数和谐振带宽受
Nanoindentation, scratch and wear tests based on an atomic force microscope (AFM) were carried out to study the reliability of diamond-like carbon (DLC) films,
In this paper, a perpendicular experiment was conducted by using 4 key process parameters, such as concentration of sodium tungstate, current density, PH value
Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coa
The hardness, elastic modulus, nano-scratch resistance and wear depth for a bulk metallic glass of Zr57Nb5Cu15.4Ni12.6Al10 and its partial crystallization alloy
Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity condition. In order to avoid this problem,