一般建筑施工中常用废机油作为混凝土构件的脱模剂,不仅成本高,而且极易造成污染。同时在浇筑后的混凝土构件表面形成一层憎水性油膜,装修时致使面层和基层粘结不牢、空鼓,甚至脱离剥落,影响装修效果。针对以上问题,我们在施工中进行了现场自配脱模剂的尝试。下面简要介 Commonly used in the construction of waste oil as a concrete component of the release agent, not only high cost, but also easily lead to pollution. At the same time, a layer of hydrophobic oil film is formed on the surface of the poured concrete components. When the decoration is completed, the surface layer and the grass-roots layer are bonded loosely, hollowed out, and even peeled off, thus affecting the decoration effect. In response to the above problems, we conducted an on-site self-dispensing mold release agent during construction. The following brief introduction