我厂随着汽车年产量大幅度提高,各铸造厂的熔化能力普遍成为薄弱环节,在生产中往往由于铁水供不应求而不得不停下造型线,其中化学成分分析速度慢,就是影响熔化能力的原因之一。为了降低生产成本,发挥我厂工频炉熔化的优势,我厂各铸造厂都在积极的大量利用废钢、铁屑等散杂废料,通过炉内增碳、增硅熔制“合成铸铁”。为此就必须要增加 I plant with a substantial increase in car production, the melting ability of the foundry generally become the weakest link in the production often due to the shortage of hot metal had to stop the modeling line, which chemical composition analysis is slow, that is, the impact of melting capacity one. In order to reduce production costs, give full play to our furnace frequency furnace melting advantages, I foundries are actively making a lot of use of scrap, scrap iron and other casual waste, through the furnace by carbon, silicon by melting the “synthetic cast iron.” This must be increased