论文部分内容阅读
(接上期)为了避免气流在气柱内产生阻力,在萨克斯入气管和大身接口处常会测量到如图1A的情况,在A处出现一反锥型喇叭口型,这种内膛与完全平滑连接的内膛演奏起来会更加通畅、浑厚,变化幅度比平滑型要大一些。实践证明了这一点,完全锥度平滑的内膛连接,反而不如在接口处有一个小反锥型演奏起来效果好,这种现象可能是制造者为了制作工艺方便、保险而采用的一种在锥度下方比横接上方
(Continued) In order to avoid the air flow in the column to produce resistance, the saxophone inlet and the body interface often measured as shown in Figure 1A situation, appeared in the A cone cone type, this bore and complete Smooth connection of the internal playing more smoothly, vigorous, change of magnitude than the smooth type to be larger. Practice has proved this point, completely tapered smooth bore connection, but not as good as the interface with a small anti-cone played good effect, this phenomenon may be manufacturers in order to facilitate the manufacture of technology, insurance and used in a taper Bottom than the top of the horizontal