论文部分内容阅读
请下载后查看，本文暂不支持在线获取查看简介。离合器组装完毕后，发动机后支撑固定孔中心与飞轮壳体后部面的距离由原来的61mm变成46mm，也就是说发动机的输出位置前移了25mm。所以，发动机需后移25mm。4 冷却器的安装WD615T1-3A发动机没有设计中央传动油冷却器的固定位置，发动机定位后，两侧大梁内无法安装冷却器。为
Please download to view, this article does not support online access to view profile. After the clutch is assembled, the distance between the center of the rear support and fixing hole of the engine and the rear surface of the flywheel housing is changed from 61mm to 46mm, that is, the output position of the engine is advanced by 25mm. So, the engine needs to move backward 25mm. 4 Cooler Installation The WD615T1-3A engine does not have a fixed position where the central transmission oil cooler is designed. After the engine is positioned, the cooler can not be installed inside the girder. for