【摘 要】
：
Nanocrystalline nonferrous metals (Cu, Al, and Ag) were synthesized by flow-levitation-molding method. The microstructure of the as-prepared nanocrystalline met
【机 构】
：
School of Metallurgical Science and Engineering,Institute of Laser Fusion
论文部分内容阅读
Nanocrystalline nonferrous metals (Cu, Al, and Ag) were synthesized by flow-levitation-molding method. The microstructure of the as-prepared nanocrystalline metals was characterized by XRD and FESEM. The microhardness and electrical resistivity were tested by the HMV-2 type Microhardness Tester and 6157 type Electrometer, respectively. The synthesis process was also studied. The results show that the spheriform particles in nanocrystalline metals have average grain size of 20-30 nm. The relative density of nanocrystalline Cu, Al, and Ag are 95.1％, 98.1％ and 98.3％, respectively. The microhardness of nanocrystalline Cu, Al and Ag are 2.01, 2.11 and 1.26 GPa respectively, which are larger than those of their coarse-grained counterparts by the factor of 4.5, 14, and 2.5, respectively. The electrical resistivity of nanocrystalline Cu at room temperature is 1.5 × 10-7 Ω·m, which is higher than coarse-grained Cu by a factor of 7.5. The pressure is the predominant factor influencing the density of the as-prepared nanocrystalline nonferrous metals.
其他文献
Al-Cu-Mg-Ag alloys with different Yb contents were prepared by ingot metallurgy and thermomechanical treatment. The effect of Yb addition on the precipitation a
The microstructures of shape memory powders of Cu-Al-Ni prepared from pure powders of Cu, Al and Ni using the mechanical alloying(MA) technique were studied by
On the basis of researching on requirement product configuration in mass customization, the concept of product family requirement class (PFRC) and requirement-m
《湖北农业科学》多年的编辑实践表明,科技期刊的选题策划工作、编辑方式方法更新,交流方式改进等是编辑工作的重要环节。本刊编辑工作始终以为科研和“三农”服务为宗旨,在
The corrosion behaviour of Mg-3.0Nd-0.4Zr (NK30) magnesium alloy was investigated in as-cast (F), solution treated (T4) and peak-aged (T6) conditions in 5% NaCI
The effects of plastic deformation on the evolution of microstructure and micro-hardness were studied on plates made from a cylindrical ingot of AlSi/AI aluminu
Nanostructural gold/polyaniline core/shell composite particles on conducting electrode ITO were successfully prepared via electrochemical polymerization of anil
The effect of sulfur compounds (including sulfur,sulfide,sulfite and sulfate),initial concentration of heavy metal and operating conditions on Cd emission in mu
血管内皮生长因子(vascularendothelialgrowthfactor,VEGF)是一种促血管新生因子,也具有促使血管通透性增加的作用,生长因子、炎症因子[1]、缺氧等可刺激内皮细胞、平滑肌细
Al-8.5Fe-1.3V-1.7Si alloy was prepared by spray deposition and hot extrusion. The high temperature plastic deformation behavior of the spray deposited Al-8.5Fe-