Multi-objective optimization of inverse planning for accurate radiotherapy

来源 :中国物理C(英文版) | 被引量 : 0次 | 上传用户:yichunjekiyi
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The multi-objective optimization of inverse planning based on the Pareto solution set, according to the multi-objective character of inverse planning in accurate radiotherapy, was studied in this paper. Firstly,the clinical requirements of a treatment plan were transformed into a multi-objective optimization problem with multiple constraints. Then, the fast and elitist multi-objective Non-dominated Sorting Genetic Algorithm (NSGA-Ⅱ)was introduced to optimize the problem. A clinical example was tested using this method. The results show that an obtained set of non-dominated solutions were uniformly distributed and the corresponding dose distribution of each solution not only approached the expected dose distribution, but also met the dosevolume constraints. It was indicated that the clinical requirements were better satisfied using the method and the planner could select the optimal treatment plan from the non-dominated solution set.
其他文献
以学生为主体和中心,引导学生自主、快乐地学习是现阶段普遍采用的一种教学理念,在这种教学理念的指导下,初中阶段的历史教学应该加强对教学过程的设计,采用情趣教学法,营造比较活
被公认导致下肢深静脉血栓形成(DVT)的三大因素是:静脉内膜损伤、血流缓慢、血液高凝状态.而解剖学基础和易发因素以及高危人群,可增加其发病率,因此DVT的发生是多危险因素综
以3,5-二羟基苯甲酸为原料,经酰化、硼氢化钠,碘还原体系还原,合成了3,5-二羟基苯甲醇.改进后的工艺操作简便,成本低廉,有利于工业化生产.
教学目标是课程实施的立足点和出发点,也可以说是一个完美教学过程必不可少的预设,预设的精彩教的才能精彩。制定教学目标,要体现新课程标准明确规定的三维目标,难度要适切,表达要
在学习中,有部分学生和成绩好的学生一样,有同样的学习环境、同样的课堂模式、同样的老师任教、同样投入了很多时间,但成绩不理想,学习力水平不高。本文认为这类学生是学习状态出
In this paper, the notion of local Sβ-compactness of L-topological spaces is intro- duced. It is proved that the local Sβ-compactness is an L-good extension,
目的 观察复合膳食纤维对摄入玉米淀粉试餐后的健康受试者碳水化合物代谢的影响.方法 将12例健康志愿者采用随机表随机分为2组,每组6人.采用随机、开放、双周期、交叉设计.第
建立了热带水果中环境激素壬基酚聚氧乙烯醚及其降解产物壬基酚的超高效液相色谱测定方法.以乙酸乙酯为提取溶剂,高速匀浆后,滤液以炭黑石墨氨基柱净化浓缩,以C18色谱柱进行
首先建立了包含自身不确定因素和外界干扰的轮式移动机器人动力学模型,然后将解耦和H∞鲁棒控制相结合应用于非完整约束条件下轮式移动机器人的轨迹跟踪。接着利用输入和输出
本文采用磷酸浸取磷矿,系统地研究了磷酸浓度、反应时间、磷矿石粒度、反应温度、鼓气速率、加酸时间等因素对磷酸氢钙中氟质量分数的影响,通过调整工艺参数和优化试验条件,