1.制作原因装载机主减速器总成位于驱动桥中部,不同型号主减速器,其自身质量可达100~200kg。传统拆卸该总成的方法是:修理工蹲着进入装载机驱动桥处,先拆掉总成上的连接螺栓,再由2名修理工用力托住主减速器总成,将其拆卸下来放在垫板上;然后将主减速器总成从底盘下一点一点地用力挪移出来。安装时,修理工需先将检修好的主减速器总成一点一点地挪移到驱动 1. Production reasons Loader main reducer assembly is located in the middle of the transaxle, different types of final reducer, its own quality up to 100 ~ 200kg. The traditional method of dismantling the assembly is: the mechanic squatted into the loader drive axle, the first removal of the assembly bolts on the assembly, and then by two mechanics firmly hold the main reducer assembly, remove it on the mat Board; then force the final drive assembly slightly out of the chassis. When installing, the mechanic needs to shift the repaired main reducer assembly to the drive bit by bit