【摘 要】
：
The springback is one of the key factors which affect the forming quality of thin-walled tube NC precision bending. The elastic-plastic finite element method wa
【机 构】
：
College of Materials Science and Engineering
论文部分内容阅读
The springback is one of the key factors which affect the forming quality of thin-walled tube NC precision bending. The elastic-plastic finite element method was proposed to study the springback process of thin-walled tube NC precision bending and the combination of dynamic explicit algorithm and the static implicit algorithm was proposed to solve the whole process of thin-walled tube NC precision bending. Then,the 3D elastic-plastic finite element model was established based on the DYNAFORM platform,and the model was verified to be reasonable. At last,the springback rule of thin-walled tube NC precision bending and the effect of geometry and material parameters on the springback rule of thin-walled tube NC precision bending were studied,which is useful to controlling the springback of thin-walled tube NC precision bending,and the numerical simulation method can be used to study other effect of parameters on the forming quality of thin-walled tube NC precision bending.
其他文献
A multi-component polymer-coated molybdenum powder was chosen for selective laser sintering(SLS). The powder was prepared by coating polymer on Mo particles and
The challenge to rapid manufacturing high performance metal components is how to consolidate the uncompressed powder preforms to full or near full density witho
Laser shock processing is a very new technique and an emerging modern process that generates compressive stresses much deeper into the surfaces of metals or all
Quasi one-dimensional zinc oxide nanomaterials were synthesized by thermal evaporation. The structure,morphologies and composition of ZnO nanomaterials prepared
The powder mixture of Cu and graphite was mechanically alloyed (MA) in an oscillating type ball mill. The milling time was varied in order to investigate its in
AgGa1-xInxSe2 polycrystals were synthesized by the method of mechanical oscillation and temperature oscillation. X-ray diffraction spectra of polycrystal powder
Ramie cloth/UP resin composite was formed at 0.2 MPa and cured at room temperature for 24 h and treated at 80 ℃ for2 h. The physical and mechanical properties
In this work, we present an evaluation of the performance and error robustness of RTP-based broadcast streaming of high-quality high-definition (HD) H.264/AVC v
The microstructure of the as-cast, as-solution-treated and as-aged wrought magnesium alloy ZK60 was studied. The results indicate that the microstructure of the
The effects of heat treatment on the microstructure and compressive properties of porous Ni-rich NiTi shape memory alloy (SMA) fabricated by self-propagating hi