论文部分内容阅读
高驱动推土机将终传动装置、中央传动机构和转向制动离合器布置在同一轴线上,并设置在行走架上方,从推土机侧面看,履带外观呈三角形。终传动装置的这种布置方法,可有效消除地面传递给驱动链轮的冲击载荷,提高终传动装置使用寿命。1.制作的必要性高驱动推土机装配时,先将终传动装置与转向制动离合器组装为终传动组件,再将该组件整体吊起安装就位。吊装时,需先将转向制动离合器一端伸入后桥箱内部,再逐步进行装配。由于终传动组件质量较大(900~1100kg),装配位置距离地面较高(约
High-powered bulldozers will be the final drive, the central transmission and steering brake clutches arranged on the same axis, and set above the walking frame, bulldozer from the side, the track appearance triangle. This arrangement of the final drive can effectively eliminate the impact load transmitted from the ground to the drive sprocket and improve the service life of the final drive. 1. The necessity of making high When driving the bulldozer assembly, the final drive and the steering brake clutch are assembled as the final drive assembly, and then the assembly is hoisted and installed in place. When hoisting, firstly, one end of the steering brake clutch should be inserted into the rear axle box and then be gradually assembled. As the mass of the final drive components (900 ~ 1100kg), the assembly location is higher from the ground (about