Study on the hot deformation behavior of Al-Zn-Mg-Cu-Craluminum alloy during multi-stage hot compres

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:javajnihook
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The mechanical behavior and microstructures of an Al-Zn-Mg-Cu-Cr aluminum alloy during multi-stage hot deformation were investigated by thermal stimulation test, optical microscopy, and transmission electron microscopy. The true stress vs true strain curves and the microstructure evolution of two hot deformation procedures were gained. The flow stress of the alloy studied decreases with increasing the deforming passes and declining the temperature, and the larger the temperature decline between adjacent stages, the larger the peak stress fall is. The stress-strain behavior mainly result from the dynamic recovery during deformation, the static recovery and re-crystallization in the delay time, and the second phases precipitated from the matrix at high temperature.
其他文献
The execution of composite Web services with WS-BPEL relies on externally autonomous Web services. This implies the need to constantly monitor the running behav
A new strategy for elastic modulus adjustment is proposed based on the element bearing ratio (EBR), and the elastic modulus reduction method (EMRM) is proposed
Semiclassical limit to the solution of transient bipolar quantum drift-diffusion model in semiconductor simulation is discussed. It is proved that the semiclass
Measurements were performed using Particle Image Velocimetry (PIV) to analyze the modification of flow by the combined effects of the rotation and the Reynolds
In this article, five kinds of silicon-containing steel sheets have been electrodeposited, and then immersed in a pure molten zinc bath at 450 ℃ for various pe
The anionic products from the reactions between metal(M=Ag,Au,Pd,Pt,Pb and Bi) vapour produced by laser ablation and hexafluorobenzene seeded in carrier gas(Ar)
In order to study stability control methods for a deep gate group under complex stresses, we conducted field investiga-tions and analyses of reasons for damage
This paper addresses the use of different slotted pores in rotating membrane emulsification technology.Pores of square and rectangular shapes were studied to un
Computational fluid dynamics (CFD) modeling of the complex processes that occur within the burner of a gas turbine engine has become a critical step in the desi
The Ni-B-Oδ and Ni-B-Zr-Oδcatalysts were prepared by the method of chemical reduction, and the deep removal of CO by selective methana-tion from the reformed