论文部分内容阅读
(15)安装车轮和轮胎。 (16)降低车辆。 (17)在轮胎上安装拆卸车轮定位测试仪。 (18)用扳手逐渐地旋转外倾角螺栓,根据外倾角规定中心值尽可能在规定范围内调整车轮外倾角至负值．如图11所示。
(15) Install wheels and tires. (16) Lower the vehicle. (17) Remove the wheel alignment tester on the tire. (18) Gradually turn the camber bolt with a wrench and adjust the camber angle of the wheel to a negative value within the specified range as much as possible according to the camber center value. As shown in Figure 11.