在小麦联合收割机投入作业前,须对扶禾器、切割器、输送带、悬挂升降机构等作检查调整,并试运行。一、扶禾器的检查调整几个扶禾器的尖应基本在同一直线上,位置偏差在直径为10毫米的圆柱体范围内,各尖间的距离相等。若不符合要求,在扶禾器与机架连接处加垫片凋整。 Before the combine harvester is put into operation, it is necessary to check and adjust the gravure holders, cutters, conveyor belts, hoisting and lowering mechanisms, etc., and try the test run. First, the Wo handle inspection and adjustment A few pointers of Wo handle should be basically in the same line, the position deviation in the cylinder diameter of 10 mm range, the distance between the tips are equal. If do not meet the requirements, in the Wo Wo rack connection with the machine plus gasket wrenching.