Investigation on Skidding of Rolling Element Bearing in Loaded Zone

来源 :Journal of Harbin Institute of Technology | 被引量 : 0次 | 上传用户:alenhrp1
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Skidding which occurs when rolling element entering into the loaded zone is prone to cause wear and incipient failure to the raceways and rolling elements. This paper presents a dynamic model to investigate the skidding of a rolling element bearing under radial load when the rolling element is entering into the load zone. In this dynamic model, the effects of the contact forces, friction forces on the rolling element-race and rolling element-cage interfaces, gravity, and the centrifugal forces of rolling elements are taken into consideration. The Hertzian contact theory is applied to calculate the non-linear contact forces. The Coulomb friction law is used to calculate the friction forces. The differential equations of rotational motion of the rolling element with regard to its central axis and the central axis of the outer ring are established respectively. The dynamic equations are then solved by using a fourth-order Runge-Kutta algorithm. The skidding characteristics of rolling element at the entry into the loaded zone are exposed, and the effects of the operating parameters on skidding behavior are carefully investigated. Skidding which occurs when rolling element enters into the loaded zone is prone to cause wear and incipient failure to the raceways and rolling elements. This paper presents a dynamic model to investigate the skidding of a rolling element bearing under radial load when the rolling element is entered In the dynamic model, the effects of the contact forces, friction forces on the rolling element-race and rolling element-cage interfaces, gravity, and the centrifugal forces of rolling elements are taken into consideration. The Hertzian contact theory The differential equations of rotational motion of the rolling element with regard to its central axis and the central axis of the outer ring are closed . The dynamic equations are then solved by using a fourth-order Runge-Kutta algorithm. The skidding characteristics of rolling elem ent at the entry into the loaded zone are exposed, and the effects of the operating parameters on skidding behavior are carefully investigated.
其他文献
The micro-porosity is usually present in the as-cast microstructure,which decreases the tensile strength and ductility and therefore limit the application of ca
In the present research,two numerical schemes for improving the accuracy of the solution in the flow simulation of molten metal were applied.One method is the P