论文部分内容阅读
我国刃具氮化钛涂层技术的应用已日益广泛,但在涂层过程中由于设备不时出现故障,使涂层不匀、结合力不足等,造成产品报废。这类废品纯属涂层不合格造成,若把这层涂层除去重涂即为合格产品,避免物质损失。迫于生产形势的需要,本厂于1990年初研制出刃具氮化钛涂层退除液,并正式投入生产。退除出来的刃具光亮如初。整个退除过程还能验证工
The application of titanium nitride coating technology has become increasingly widespread in our country. However, due to the equipment failure from time to time in the coating process, the coating is uneven and the bonding force is insufficient, resulting in product scrap. This type of waste is purely caused by unqualified coating, if this coating is removed recoat is qualified products, to avoid material damage. Forced to the needs of the production situation, the factory in early 1990 developed a titanium nitride coating removal solution, and formally put into production. Removed out of the blade as bright as ever. The entire process can also verify the exit process