In a basic solution containing 18 g/L Na2SiO3,the anodizing of AZ91HP magnesium alloy was investigated with and without ......

This work deals with the deposition of lead(Pb) thin films by the U V pulsed laser ablation technique,for their further ......

A film growth mechanism, expressed in terms of depositing hard films onto the soft substrate, was proposed. Multicompone......

New carbon based coatings have been developed for cutting of light metals such as aluminum. These coatings can be used e......

A mechanically assisted electroless (MAE) barrel-plating technique has been developed to deposit Ni-P coatings on carbon......

Subsurface fluid injections can disturb the effective stress regime by elevating pore pressure and potentially reactivat......

为了改善采用超高泳透力电泳漆与水性3C1B工艺所得涂层的短波,讨论了电泳粗糙度和板材粗糙度对涂层橘皮的影响。除了控制板材粗糙......

Subsurface fluid injections can disturb the effective stress regime by elevating pore pressure and potentially reactivat......

在机械行业中，轴承、光学器件、计算机芯片等的运行状况均取决于其表面形貌的实际情况，采用二维形貌测量仪可以精密地对其进行测量。......

目的评价活动义齿不同清洁方式对于钴铬合金义齿铸造支架表面形貌的影响。方法离心铸造35个钴铬合金金属试样（15 mm×10 mm&#21......

碳纤维复合材料具各向异性、导热系数低、磨削时热量易堆积,导致切削条件恶劣,严重影响工件表面质量.采用GC60J碳化硅砂轮平面磨削......

Anodic oxide films of titanium alloy Ti-10V-2Fe-3Al were sealed in calcium acetate solution. The morphology and composit......

为了利用微弧氧化工艺在钛合金表面制备钙磷生物膜层,并确定该工艺电源占空比对膜层性能影响.研究了在恒电流和恒电压下,电源占空......

The research on boundary-layer receptivity is the key issue for the laminarturbulent transition prediction in fluid mech......

绝大多数河工模型都需要加糙才能满足河工模型的阻力相似，因此模型加糙效果的好坏直接关系着河工模型模拟的效果和精度。通过水槽试......

简介金属－绝缘层－金属隧道结的基本结构、工艺流程及发光机理，利用原子力显微镜观察ＭＩＭ隧道结的表面形貌，发现结表面存在规则有序的自然粗......

Grinding operation is a finishing process often employed when high precision and narrow geometric tolerances are require......

Structural intervention involves the restoration and/or upgrading of the mechanical performances of structures. In addit......