anneali相关论文
Helix-sense-selective radical polymerization of bulky styrenic monomers: chiral induction and liquid
Eight chiral vinylterphenyl monomers,(+)-2,5-bis{4′-[(S)-1″-methylpropyloxy]phenyl}styrene(Ia),(+)-2,5-bis{4′-[(S)-2......
Columnar growth of crystalline silicon films on aluminium-coated glass by inductively coupled plasma
Silicon films were grown on aluminium-coated glass by inductively coupled plasma CVD at room temperature using a mixture......
High permittivity materials have been required to replace traditional SiO_2 as the gate dielectric to extend Moore’s la......
Large aperture Nd:phosphate laser glass is a key optical element for an inertial confinement fusion(ICF) facility. N31,o......
The Effect of Annealing under Non-vacuum on the Optical Properties of TiAlN Non-vacuum Solar Selecti
TiAlN solar selective absorbing coatings which were deposited on 304L stainless steel using cathodic arc evaporation met......
Ni layers were deposited on the two sides of pure Fe substrate by using electroplating to form Ni/Fe/Ni diffusion couple......
Transient competition between photocatalysis and carrier recombination in TiO_2 nanotube film loaded
Highly ordered TiO2 nanotube array(TNA) films are fabricated by using an anodic oxidation method. Au nanoparticles(NPs) ......
Influence of different Fe sources and concentrations on formation of magnetosomes in Acidithiobacill
The whole genome of strain Acidithiobacillus ferrooxidans ATCC 23270 was analyzed by bioinformatics and some homolog gen......
Bi_(12)SiO_(20)single cryslats of dimensions 45×50×180mm about 3.5kg in wei-ght have been grown in our institute by t......
The optical absorption edge and ultraviolet (UV) emission energy of ZnO films deposited by direct current (DC) reactive ......
Influence of an Fe cap layer on the structural and magnetic properties of Fe_(49)Pt_(51)/Fe bi-layer
The influences of an Fe cap layer on the structural and magnetic properties of FePt/Fe bi-layers are investigated. Compa......
Configuration evolution of Al_n(n=3,4,6,13,19) clusters studied using linear synchronous transit met
The evolution of configurations of Aln (n=3,4,6,13,19) clusters were investigated using linear synchronous transit (LST)......
Recently,considerable attention has been paid to the synthesis and research of various rare-earth(RE) doped fluoride nan......
The effects of thermomechanical cycling on the shape memory behavior and transformation temperatures of a Ni50.2Ti49.8 a......
Effect of Annealing Process on Microstructure and Mechanical Properties of Ultrafine Copper Prepared
The spark plasma sintering (SPS) method is used to prepare the ultrafine copper with the average grain size less than 10......
Transmission electron microscopy was used to investigate the effect of isothermal holding temperature and time on the na......
Mechanical Property and Microstructural Characterization of C-Mn-Al-Si Hot Dip Galvanizing TRIP Stee
Mechanical properties and microstructure in high strength hot dip galvanizing TRIP steel were investigated by optical mi......
The wear response of a newly developed metastable b-type Ti–25Nb–2Mo–4Sn(abbreviated as Ti-2524) alloy was investigat......
Secondary Recrystallization Behaviors of Grain-Oriented 6.5 wt% Silicon Steel Sheets Produced by Rol
By rolling and nitriding processes, 0.23- to 0.3-mm-thick grain-oriented 6.5 wt% silicon steel sheets were produced. The......
The residual stress distribution was studied by an analytical model, due to shot peening on the welding carbon steel sur......
Chemically synthesized ZnS thin film is found to be a good x-ray radiation sensor. We report the effect of annealing on ......
通过化学还原和热处理的方法制备出了具有核壳结构的Ni/NiO纳米线,利用扫描电子显微镜、X射线衍射、热重分析等手段对不同退火温度......
Using the Sol-Gel method to produce the KTN ultrafine powder and the sintering technique with K2O atmosphere to prepare ......
报道了基于Ge衬底分子束外延碲镉汞原位As掺杂材料的研究结果,进行了As掺杂碲镉汞薄膜生长的温度控制研究;分析了As束流对材料晶体......
通过采用在不锈钢冷轧薄板退火酸洗机组工艺段提取的SUS304冷轧不锈钢试样进行模拟试验,证明了张家港浦项不锈钢有限公司退火酸洗......
结合金相组织观察、显微硬度测量及室温拉伸实验，对压下率分别为30％、40％、50％及60％时的4A60／08Al冷轧复合带的组织与力学性能进行了研究......
报道了退火温度和冷却条件对轿车同步器齿环用HMn59-2-1-0.5合金挤管的金相组织及力学性能的影响,为材料加工及产品性能控制提供理......
论述退火模拟方法及其在胜坨油田二区的应用，包括空间结构分析、变差函数计算、退火模拟预测等内容。分析了三角洲储层参数变差函数......
研究了辐照剂量、剂量率、退火温度、退火时间、辐照方法等因素对晶体管ｈＦＥ值（电流放大倍数）的影响。结果表明，电子束辐照能有效地降低晶......
利用激光脉冲法在LaAlO3衬底上沉积制备LaNiO3薄膜作为底电极材料,其上利用射频磁控溅射制备了PZT铁电薄膜。试验分析了LaNiO3表面......
利用对靶磁控溅射法在玻璃基片上制备VOx薄膜，采用正交实验方法研究了镀膜条件对VOx薄膜电阻温度系数（TCR）的影响，得到优化的镀膜工艺......
为了研究磁场退火对金属材料的再结晶织构和晶粒尺寸的影响,对冷轧无取向硅钢薄板进行了普通退火以及0.1,6和12 T下的磁场退火,磁......
采用减压化学气相沉积方法,依靠纯N2稀释的SiH4气体的热分解反应,在玻璃表面生长了纳米硅镶嵌的复合薄膜.实验研究了退火前后薄膜......
微观结构和在退火前后的渗出的 Mg-2.5Zn-0.5Y 合金的机械性质处理被调查。同样渗出的合金展出收益 305.9 MPa 的张力的力量(YTS )......
用双悬臂梁预制裂纹试样,研究了硼酸铝晶须增强6061 Al复合材料在3.5%NaCl溶液中的应力腐蚀(SCC)开裂行为,探讨了时效对复合材料应......
以蔗糖溶液为样品，试验研究了退火处理、升温速率、溶液浓度等因素对最大冻结浓缩溶液的玻璃化转变温度Ｔｇ的影响，结果表明，退火处理对Ｔｇ值......
针对专家系统知识获取的“瓶颈”问题，本文从优化角度建立了一个最终可归结为大规模组合优化问题的知识获取模型，并通过基因遗传算法......
通过分析与试验对引风机叶轮焊接变形规律进行了探讨,采用较为合理的焊接工艺措施,有效地控制了叶轮焊接变形,并对残余焊接变形进......
采用真空热蒸发技术在光学玻璃基底上制备了CdSe薄膜,研究了真空下不同退火温度和退火时间对CdSe薄膜晶体结构和表面形貌的影响。X......
根据超薄冷轧低碳钢带的技术要求,对炼钢化学成分进行控制,对热轧工艺参数进行优化,对六辊HC冷轧机的AGC工艺控制系统进行升级改造......
本工作测量了反应堆脉冲中子、γ辐照SiGeHBT典型直流电参数和退火因子。在反应堆1×10^13cm^-2的脉冲中子注量和257Gy（Si）γ总......
研究了退火温度对棒材组织、硬度及力学性能的影响，确定了变形量对铌钽合金棒再结晶退火温度的影响规律。结果表明，随变形量的增大，材......
介绍了在同一变形条件下,退火温度对高纯Al-1%Si-0.5%Cu（质量分数,下同）合金的再结晶晶粒尺寸的影响。实验证明纯度达到99.999%以上......
