solidified相关论文
The dislocation structure of directionally solidified(DS)Rene 80 superalloy during tensileand creep deformation has bee......
本文在理论上分析了由作者发展起来的一种两步雾化——快速凝固制粉技术,研究了某些工艺参数对铝锂合金粉末制备过程的影响。在建......
The phase constitutes and microstructures of TiAl_3 intermetallic compound solidified under vacuum and 5.5GPa pressure......
By comparisons of interface growth temperatures of different phases in eutectic systems, competitive growth between the ......
Effect of Solidification Parameters on the Microstructure and Creep Property of a Single Crystal Ni-
A single crystal Ni-base superalloy was processed with withdrawal rates between 2 and 7 mm/min.The ascast microstructure......
Microstructural evolution and corrosion behavior of directionally solidified FeCoNiCrAl high entropy
The FeCoNiCrAl alloys have many potential applications in the fields of structural materials, but few attempts were made......
Cu_(90)Zr_(10-x)Al_x(x=1, 3, 5, 7, 9; at.%) alloy rods were synthesized based on rapid solidification method. The struct......
Robinia pseudoacacia ’Idaho’ (Robinia×ambigua ’Idahoensis’, R. pseudoacacia×R. viscosa) modified by a mtl-D gene w......
By laser heated pedestal growth method,Bi_2Sr_2CaCu_2O_(8+δ) as-grown fibers with differentmorphologies were solidifie......
The microstructural evolution and growth mechanism of the melt spun Al In monotectic alloy were studied. During the rap......
期刊
Droplets of Zr41Ti14Cu12.5Ni10Be22.5 glass forming alloys with different sizes are solidified in a drop tube containerle......
A multiphase alloy NiAI-28Cr-5.8Mo-0.2Hf was directionally solidified in Ar atmosphere in an Al2O3-SiC2 mold by standard......
A rapidly solidified Al-2.5Ti-2.5Fe-2.5Cr (mass fraction in %) alloy was prepared by melt spinning. As-quenched and as-a......
Effect of phosphorus on the microstructure and high temperature properties of a cast Ni-base superalloy M963 has been in......
Coarsening Manner and Microstructure Evolution of Al-In Hypermonotectic Alloy during Rapidly Cooling
A numerical model reflecting the real physical processes well has been developed to predict the coarsening manner of the......
Droplets of Cu-20%Sb hypoeutectic alloy has been rapidly solidified in drop tube within the containerless condition. Wit......
A series of laser surface remelting experiments of Al-1.1, 3.2 and 5.6 wt % Mn alloys has been conducted using a 5 kW C......
The droplets of Cu-11wt. %Sb hypoeutectic alloy have been rapidly solidified during containerless processing in a 3 m d......
Foil powders of Al 5.0 Cr 4.0 Y 1.5 Zr (%) were prepared by using a multi stage atomization rapid solidifi......
Under the condition of die casting and reheating temperature of 570-580℃, the rhe-ological behavior of semi-solid alumi......
Ti Al B alloys were produced by in situ synthesis method. The phase constitutions, microstructure of these alloys and......
期刊
A model has been developed for the calculation of the microstructural evolution in a rapidly directionally solidified im......
期刊
Rapidly solidified hypereutectic Al-Si alloys were prepared by powder hot extrusion. By eliminating vacuum degassing pro......
Effect of high temperature aging on microstructure and mechanical properties of a directionally soli
The effect of aging at 950?℃ for up to 2?000?h on microstructure and mechanical properties of alloy IC6A was investigat......
期刊
The density of Ni-Cr alloy in the mushy state has been measured using the modified sessile drop method. The density of ......
Droplets of Co-37.6 wt pct Mo and Ni-47.7 wt pct Mo eutectic alloys were rapidly solidified during containerless proces......
Rapidly solidified Al-10Sr alloy ribbons were prepared using a single roller melt spinning technique. The annealing pro......
Situation and Prevention of Loess Water Erosion Problem along the West-to-East Gas Pipeline in China
Loess water erosion constitutes a great threat to the safety of the West-to-East Gas Pipeline in China. Through aerial-p......
研究了Al-8.28wt%Fe-3.21wt%Ce合金快速凝固粉末的爆炸压实工艺。证明爆炸压实可制得Al-Fe-Ce合金的致密坯块并保留了快速凝固粉末的......
The technology of bio-grouting is a new technique for soft ground improvement. Many researchers have carried out a large......
Determining the cooling rate of a rapidly-solidified (RS) technique subjectively is a prerequisite of knowing the RS tec......
期刊
Dumb-bell Structures of Nonstoichiometric La(Ni, Sn)_(5+x) Alloys and Their Relationships with the P
Crystal structures of nonstoichiometric La(Ni, Sn)5+x (x = 0.1~0.4) alloys prepared by different methods were investigate......
This article investigated effects of degrees of deformation, heat treatment temperatures and holding times on the recrys......
In order to investigate the change in liquid microstructure of Al-Si alloy treated by electric pulse (EP), X-ray diffra......
Influence of thermomechanical processing on the structure and properties of Cu-Ag alloy in situ comp
The influences of the thermomechanical processing, including the solidification conditions, the cold deformation and the......
An experiment of a new type full size copper stave for a real blast furnace was carried out in a special-designed exper......
This paper reports that the nanostructured β-FeSi2 bulk materials are prepared by a new synthesis process by combining ......
Growth characteristics of directionally solidified Al_2O_3/YAG/ZrO_2 ternary hypereutectic in situ c
Oxide eutectic ceramic in situ composites have attracted significant interest in the application of high-temperature str......
This study was carried out to look for the substitute products of lead cerrobend block and determine whether the product......
The particle image velocimetry (PIV) technique was used to study the fluid flow phenomena that occurred during continuou......
Simulation of thermal behavior during peritectic steel solidification in slab continuous casting mol
Thermal behavior of the solidifying shell in continuous casting mold is very important to final steel products.In the pr......
The effects of separation time and magnetic induction intensity on the separation efficiency of alumina particles with d......
The relationship between Pb leaching concentration and the solution’s p H with time was analyzed when cement in its sol......
Interfacial heat transfer is a key issue in many solidification processes.In the paper,a novel experimental apparatus ha......
The effect of pre-melting refining slag containing different contents of Ce2O3 on the absorption and modification of Al2......
An iron-silicate slag, from a zinc-copper smelting process, and mixtures of this slag with 5wt%, 10wt%, and 15wt% alumin......
Numerical Simulation on Distribution of Stress in the Electromagnetic Soft-Contact Continuous Castin
A two-dimensional axisymmetric finite element model for stress distribution of billet in electromagnetic soft-contact co......
Numerical Simulation on Thermal Stress Field in a Wide Slab Mould of Peritectic Steel Continuous Cas
A numerical simulation of the thermal stress field of the solidified shell in the mold during continuous casting of peri......
The microstructure and solute distribution of Pd40Ni40P40 alloy solidified both on board a Chinese retrievable satellit......
The directional solidification of highly undercooled single phase alloy is put forward. In contrast with the convention......