论文部分内容阅读
Effect of ageing treatment on the abrasive wear of HAVS Fe-Cr2C3-M coatings
【机 构】
：
School of power and mechanics,Wuhan University,Wuhan 430072,China
【出 处】
：
第四届国际表面与界面科学与工程学术会议(The Fourth International Conference on S
【发表日期】
：
2009年12期
其他文献
This paper reports an investigation into the feasibility of increasing the surface hardness of austenitic stainless steels by pack nitriding process using metal nitride powders as a nitrogen source.Th
会议
Thermo-chemical reactions of modified PAN fibers during heat-treatment process were systematically studied by DSC,FT-IR,EA,XPS,etc..Comparing with original PAN fibers,chemical reactions,structures and
Amorphous hydrocarbon films containing low chromium content was deposited on silicon wafer by a hybrid beams consisting of a DC magnetron sputtering and a linear ion source.Chmmiurn concentration in t
Macroparticles (MPs) reduction is the main subject in the process of arc ion plating and there are many process parameters affect the MPs distribution on the resultant films.However,the effects of pro
Substrate Bias Effect on the Structure and Mechanical Properties of DLC films by a Linear Ion Beam S
Diamond-like carbon films were synthesized on P type Si (100) substrates by an advanced linear ion beam system using the precursor gas of acetylene.Effect of substrate negative bias on the microstruct
Dependence of microstructure and thermal conductivity of EB-PVD TBCs on the substrate rotation speed
The dependence of microstructure and thermal conductivity of EB-PVD TBCs on the substrate rotation speed during deposition was investigated.The microstructure was checked by SEM and the thermal conduc
会议
NiAl have been utilized as protective coatings or the bond coats in thermal barrier coatings (TBCs).Interdiffusion between the coatings and underlying superalloy substrates usually results in the form