首钢京唐5500m3高炉炉缸炉衬温度分析

来源 :第十六届全国大高炉炼铁学术年会 | 被引量 : 0次 | 上传用户:mfl110
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文以首钢京唐两座5500m3高炉炉缸炉衬温度为研究对象,介绍了京唐高炉的炉缸结构和炉缸炉衬温度监测点的分布,选择炉底中心、炉缸象脚区、铁口区等代表性位置的温度测点,采集了开炉至今的温度实时数据,进行了温度趋势分析、传热计算、侵蚀趋势及1150℃等温线剖面计算模拟,为综合评价炉缸侵蚀状况提供一个简单的分析方法,为高炉长寿操作提供参考.
其他文献
With the increase of wall thickness of pipeline steel,DWTT fracture toughness has become more and more sensitive to production process,including alloy design and processing,so it need more tight and m
Repeated deformation with optimum reductions in roughing mill exceeds the critical amount of strain required for recrystallization to occur.Recrystallization during roughing mill rolling refines auste
Over the past twenty years,significant advances have been made in the field of microalloying and associated application,among which one of the most successful application cases is HTP practice for hea
The susceptibility to hydrogen embrittlement in high strength mooring chain steel with different boron content(0,0.003%,0.008%)were investigated by electrochemical hydrogen charging technique and tens
This paper analyzes precipitation and dislocation strengthening behaviors of a 27mm thick Niobium-bearing Grade X80 steel plate for strain based design line pipe manufacture.The steel is produced by t
Extensive investigations of metallurgical roles played by Nb microalloying in advanced products of seamless steel tube have been carried out.The results show that with Nb microalloyed,the recrystalliz
With the exploitation of gas mixed with sulfur,the requirement of hydrogen induced cracking(HIC)resistance for medium carbon vessels serving at environmental with hydrogen sulfide solution become more
The effect of austenite deformation and continuous cooling on the evolution of microstructure in a high temperature processing(HTP)concept pipeline steel was investigated in this research.It was found
This study is focused on the effect of vanadium addition to an API X100 steel.Laboratory heats were melted and control rolled based on a coil plate production process.Compared to non vanadium steel,it
Three kinds of Nb-Ti-Mo ferrite matrix micro-alloyed steels with three different Ti contents were designed.With optical microcopy,transmission electron microcopy,energy spectrum analysis and tensile t