Study of low-pressure premixed laminar n-heptane+propane/oxygen/nitrogen flames

来源 :Chinese Science Bulletin | 被引量 : 0次 | 上传用户:xtopg
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Low-pressure premixed laminar n-heptane+propane/oxygen/nitrogen flames were investigated with tunable synchrotron vacuum ultraviolet (VUV) photoionization and molecular-beam sampling mass spectrometry. Three flames with different mass percentage of propane in the fuel blends of 0%, 10%, and 20% were studied. The combustion intermediates were identified by comparing the measured IEs with those values in literatures. Mole fraction profiles of the main species were compared among the three flames. The experimental results provide detailed data in understanding the combustion of n-heptane and n-heptane/propane blends in engine. They are also helpful in establishing and verifying the kinetic models. Low-pressure premixed laminar n-heptane + propane / oxygen / nitrogen flames were investigated with tunable synchrotron vacuum ultraviolet (VUV) photoionization and molecular-beam sampling mass spectrometry. Three flames with different mass percentage of propane in the fuel blends of 0% The combustion intermediates were identified by comparing the measured IEs with those values ​​in literatures. Mole fraction profiles of the main species were compared among the three flames. The experimental results provide detailed data in understanding the combustion of n-heptane and n-heptane / propane blends in engine. They are helpful to establishing and verifying the kinetic models.
其他文献
建设部1月9日晚在其网站公布《关于征求90平方米以下住宅设计要点(征求意见稿)意见的函》。可是,还不到24小时,该函即被废止。此事背后折射出的是调控思路上的模糊。它告诉我
研究了采用硅片粘接和先用金刚石研磨、然后用非接触抛光的腐蚀方法(BE-SOI)制作薄膜SOI的制造工艺和这种膜的缺陷特性。制作了一些MOS器件,并测试了它们在辐射前后的电特性
前言 许多年来,在双面及多层印制板制造中,为了获得电镀前良好的金属孔壁,必须除去孔壁上的树脂玷污(主要是印制板的基板材料)。先后曾采用了多种去玷污工艺(一般均采用湿式
2000年,敖日格勒、达来、海鹰、呼和巴拉4个蒙古族年轻人创办的蒙古文化网站映入人们的视线。在此之前,曾有位学者对他们说:“做 In 2000, Mongolian cultural websites fou
本文介绍一种新颖的,用介质腔稳频的压控振荡器,叙述了其电调原理,设计考虑,并给出了实验结果;该振荡器的中心频率f_0=5.415GHz;电调带宽△f≥20MHz(V_0=G~-15v);输出功率p_o
TLC—556是适合工业用电子设备的高密度化和集成电路芯片的直接焊接等而开发的耐高温铜箔叠层板,具有如下特点: (1) 能直接将元件焊到电路上。 (2) 高温时的特性好(例如在15
Biomorphic silicon carbide (bioSiC) with macro-channels and alveolate micropores was prepared by spontaneous infiltration of melted silicon into a carbon templa
用超高真空电子束蒸发法,在单晶Si(100)衬底上淀积厚度为1000A的单层Mo膜,并在不破坏真空条件下,继续蒸镀120Aα-Si层。将样品在1.3×10~(-4)~2.6×10_(-4)Pa真空条件下退火,
本文首先描述了发光二极管的静态和动态特性,对广播电视光纤传输系统中所采用的 DG 和 DP 补偿电路,从理论上进行了详细的分析,给出了设计计算公式,并用计算计计算了此电路的
在阅读教学中,要珍视学生的阅读期待,在对话中增强意识。对话的心态,应从遵从走向反思;对话的面貌,应从单一走向多元;对话的品质,应从肤浅走向深刻;对话的流程,应从平移走向