论文部分内容阅读
在结构损伤后修理工作中,处理结构损伤的程序有以下几步。1.定位损伤、确定损伤的类型明确结构的类型、损伤的部位,什么样的损伤,以及如何用专业术语去描述损伤。2.查找损伤允许的标准根据受损的结构类型、受损的部位、损伤的类型去查找手册以获得该损伤的允许标准。以机身蒙皮压坑为例,应该查找相应机型的结构修理手册(SRM)中关于压坑的标准。只有了解标准,才能根据受损的结构件及损伤位置确定需要测量比较哪些关键数据;由于手册不断地改版,因此必须保证所用标准是现行有效的。
Repair work in the structural damage, the process of dealing with structural damage in the following steps. 1. Locate the damage and determine the type of damage Identify the type of structure, the site of the injury, what kind of damage, and how to describe the damage in technical terms. 2. Find the allowable damage criteria According to the type of damaged structures, damaged parts, type of injury to find the manual to get the allowable standard of the damage. To body pressure pit pit, for example, you should find the appropriate model structure repair manual (SRM) on the pressure pit standards. It is only by understanding the criteria that the key components of the structure that need to be measured and compared can be determined based on the location of the damaged structure and the location of the damage. Due to the continuous revision of the manual, it must be ensured that the standards used are current and valid.