Microbridge testing was used to measure the Youngs modulus and residual stress of metallic films. Samples of freestanding NiFe film microbridge were fabricated
The effects of the process parameters of TIG (tungsten inset gas)-flux welding on the welds morphology,angular distortion, ferrite content and hot cracking in a
Magnetron-sputter deposition was used to produce Ti-48Al-8Cr-2Ag coating on a cast alloy substrate with the same composition. Hot corrosion was carried out in m
Eighteen reinforced concrete beams, including 16 beams strengthened with CFRP laminate at different levels of preload and 2 control beams, were tested to invest
High resolution magic angle spinning (MAS)-1 H nuclear magnetic resonance (NMR) spectroscopic-based metabonomic approach was applied to the investigation on the
Optimal parameters for depositing Titanium nitride (TiN) thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si (10
The aluminum coating layer was formed on a copper substrate with local strain region by using the electrodeposited method. It was found that the particle shape