论文部分内容阅读
1．电解去毛刺这是利用电能、化学能溶解阳极去掉毛刺。零件与直流电源的正极相连为阳极,成形工具与直流电源的负极相连为阴极,两极之间保持一定的间隙,让电解液循环流动。当阳极和阴极浸入溶液并通入直流电后,阳极表面发生电化学反应,零件表面被溶解的金属与电解液形成黏性液体集中在零件表面的低凹处,具有较高的电阻和较小的导电率,可以保护零件表面不腐蚀或少腐蚀；而毛刺突出于零件表面,在温差的影响下,液膜难以形成,通电后电力线高度集中于毛刺部分,距阴极最近的毛刺将
1. Electrolytic deburring This is the use of electricity, chemical dissolved anode to remove burrs. The positive pole of the part and the DC power supply is connected to the anode. The forming tool is connected to the negative pole of the direct current power supply for the cathode, and a certain gap is maintained between the two poles, so that the electrolyte circulates and flows. When the anode and the cathode immersed in the solution and through the DC, the electrochemical reaction of the anode surface, the surface of the part of the dissolved metal and electrolyte to form a viscous liquid concentrated in the concave surface of the parts, with higher resistance and smaller Conductivity, can protect the surface of parts from corrosion or less corrosion; and burrs protruding from the surface of the part, under the influence of temperature difference, the liquid film is difficult to form, the power line is highly concentrated in the burr part of the power, from the cathode burr