论文部分内容阅读
草坪建植工程广泛应用于园林、护坡、建筑物顶部等绿化工程和室内绿化装饰工程中。目前,主要施工技术方法是在苗圃基地培育草皮卷或草皮块或一种植生带,同时生产栽培草皮卷(块)的基质材料,运输至准备好的绿化工程施工场地,平铺于场地之上,经过几道工序的施工以后,再经过几个月的养护管理,最终培育成坪,完成绿化工程。这种施工方法建植的草坪是固定于场地之上“永久”草坪,草坪不可移动和拆散,否则就损坏草坪了。建植草坪材料不易控制,损耗量大。施工中有多道工序,施工复杂,机械设备较多,施工队的技术水平要求高,而且在施工准备时要对场地进行“整形”,改变场地原有的结构状况和环境条件,易造成环境污染,产生工程施工垃圾。特别是若草坪场地需要维修调整结构或改变场地用途时,则只能损坏草坪,造成浪费,我们提出一种可进行组装、拼合和拆开、移动的草坪建植方法,该方法可以实现大面积绿化,一次成坪完成建植草坪工程。
Lawn planting project is widely used in landscaping, slope protection, the top of buildings and other greening projects and indoor greening decoration projects. At present, the main construction technique is to cultivate turf or turf or a vegetative belt at a nursery base while producing a substrate material for cultivation of turf roll (block), transport it to a prepared greening construction site, and lay it on the site , After a few steps of construction, and then after several months of conservation and management, and ultimately cultivate Ping, completed greening project. This construction method is built lawn is fixed on the ground above the “permanent” lawn, the lawn can not move and break up, otherwise it will damage the lawn. Lawn planting material is not easy to control, loss of large. Construction of a number of processes, the construction complex, more machinery and equipment, construction teams require high technical level, but also in the preparation of the construction site to be “plastic” to change the site of the original structure and environmental conditions, easy to cause the environment Pollution, resulting in construction waste. In particular, if the lawn field needs to be repaired and the structure of the site is adjusted or the use of the site is changed, the lawn can only be damaged and waste is caused. Therefore, a lawn planting method that can be assembled, split and disassembled and moved is proposed, Greening, once completed to build a lawn construction project.