论文部分内容阅读
丰田车系所采用的防盗系统,是采用控制起动机继电器控制线圈回路的方式。当防盗系统启用时,起动机不能工作。 1.防盗遥控器的诊断步聚: (1)将点火开头钥匙插入锁芯,并放在“OFF”位置上,将驾驶员侧车门打开。 (2)将防盗电脑第9号脚搭铁1s以上,再将点火开头钥匙取出。10s内关上车门,并锁上门锁。 (3)此时门锁会自动再开启。
Toyota car system used by the anti-theft system is controlled starter coil relay control circuit. When the anti-theft system is enabled, the starter can not work. 1. Anti-theft remote control diagnostic steps gather: (1) The ignition key into the lock cylinder, and on the “OFF” position, the driver side door open. (2) Anti-theft computer No. 9 feet over the iron 1s, and then remove the ignition key. Close the door within 10s and lock the door. (3) At this point the door lock will automatically open again.