我厂是一个生产各种类型磨床的工厂,磨床的液压系统和工件磨削的冷却液都需要大量的机械油和肥皂水。多年来,漏油和漏水成了磨床产品普遍存在的老问题。为了解决这个问题,厂党委成立了三结合治漏小组,并举办了学习班。认识到查“三漏”先要查路线。首先,取得了思想、认识、步骤和行动上的四个统一,接着采取了学查结合、内外结合的办法,厂内发动群众查漏点,提办法;到厂外进行用户访问,听批评,学经验,然后选择批量大的基型产品M1432A 万能外圆磨床作为典型,解剖麻雀,以点带面。在大搞群众运动的同时,又相应建立必要的规章制度,每月重点检查一次,分析一次;每季度抽查一次,解剖一次的工作制度。通过一个阶段的摸索,归纳了治漏的一般做法有两条:一是“堵”,堵塞漏油处,二是“引”,在堵不住的地方,就因势利导,把油 Our factory is a factory that produces various types of grinders. The hydraulic system of the grinder and the coolant that the workpiece grinds require a lot of machine oil and soapy water. Over the years, oil spills and leaks have become ubiquitous old problems in grinder products. In order to solve this problem, the factory party committee set up a triple combination of leakage management team and held a class. Realize that checking “three leaks” must first check the route. First of all, we have achieved four unifications in our thinking, understanding, steps and actions. We then adopted a combination of learning and studying, combining internal and external approaches to mobilize the masses to make leaks and make suggestions. We also conducted user visits outside the plant to listen to criticisms, Learn experience and then select the bulk of the M1432A Universal Cylindrical Grinder as a typical, anatomical sparrow with a dotted surface. While vigorously pursuing the mass movement, they have also set up the necessary rules and regulations accordingly, focusing on monthly inspections once and analyzing once; conducting spot checks on a quarterly basis and dissecting the working system once. Through a phase of exploration, the general practice of governing leakage summarized two things: First, “plugging” to plug the spill Department, and second, “cited” in the unstoppable place, on the basis of the trend, the oil